Control 88M 120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer

Frequency Response (-10dB): 47 Hz – 16 kHz
Power Rating: 240 W Continuous Program (2 hrs) | 120W (480W peak), Continuous Pink Noise (2 hrs) | 100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps: 70V — 60W, 30W, 15W & 7.5W | 100V — 60W, 30W, 15W
Frequency Response (±3 dB): 60Hz – 15 kHz
Maximum Input Voltage: 28.0 V
Sensitivity: 87 dB, 1W @ 1m (ave. 80Hz – 16kHz)
Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).
Directivity (Q): 2.1
Directivity Index (DI): 3.2 dB
Rated Maximum SPL: 108 dB @ 1m
Nominal Impedance: 8Ω (at 8Ω setting)
Minimum Impedance: 6.6Ω at 9.5kHz
Insertion Loss: <0.5 dB at any tap setting Thru Setting: 8Ω nominal Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF Recommended Protective High-Pass: 45 Hz for 8Ω operation, 24 dB/oct | 80 Hz for 60W tap, 24 dB/oct | 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct Low Frequency Driver: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround. High Frequency: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome. Enclosure Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated. Grille: Powder coated stainless steel. Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated. Agency Ratings: UL1480, Transformer UL Recognized per UL1876, ROHS compliant. Terminals: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section) Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS). Colors: Hunter Green, RAL6018 Dimensions (H x W x D): 524 x 355 x 355 mm (20.7 x 14 x 14 in.) Net Weight: 7.8 kg (17 lb) Shipping Weight: 10.5 kg (23 lb) Included Accessories: (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver Installer-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.