Storage NAS QNAP TS-231P2-4G

TS-351-2G 3-Bay CDC J1800 2.41GHz 2GB RAM 1LAN
Summary Spec: 3-Bay NAS, Intel Celeron J1800 2-core 2.41GHz, up to 2.58GHz, 2GB DDR3L SODIMM RAM (1 x 2GB, 2 DIMMS, max 8GB), 3 x 3.5″/ 2.5″ SATA drive slots, 2 x M.2 2280 Gen2 (x1) NVMe PCIe slots, 1 x GbE LAN, USB 3.0/2.0, built-in spesker, HDMI
Bay: 3-Bay
CPU: Intel® Celeron® J1800 dual core 2.41 GHz processor, up to 2.58 GHz
System memory: “2 GB DDR3L (1 x 2 GB)
(Maximum 8 GB (2 x 4 GB) 2 x SODIMM slot)”
Flash Memory: 12 MB NAND Flash
Hard Disk Drive: “Hot-swappable 3 x 3.5″”/2.5″” SATA HDDs/SSDs

Note:
1. HDD 1~2 supports SATA 3Gb/s, HDD 3 supports SATA 6Gb/s
2. 2.5-inch HDD/SSD drive tray bases can be purchased from QNAP Online Shop”
M.2 SSD Slot: “2 x M.2 PCIe (Gen2 x1, 5Gbps) NVMe 2280 slots

Note:
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD”
Maximum Raw Capacity
USB Port: “1 x USB 3.0
2 x USB 2.0”
LAN Port: 1 x Gigabit RJ45
HDMI Output: 1 x HDMI v1.4a
Audio: “1 x Built-in speaker
1 x 3.5mm line out jack

Note: You cannot use the speakers and the line-out jack simultaneously.”
RAID Support: RAID RAID 0/1/5/, single, JBOD
IP Camera Support: Includes 2 free camera licenses, up to 32 camera channels via additional license purchase
Power Supply: “HDD standby: 13.21 W
In operation: 25.63 W(with 3 x HDDs and 2 x M.2 SSDs)

HDD: WD10EFRX
M.2 SSD: INTEL SSDPEKKW12 128G”